Engineering, 15.04.2020 02:57 shirleyyxo
A cylindrical rod of 1040 steel originally 11.4 mm (0.45 in.) in diameter is to be cold worked by drawing; the circular cross section will be maintained during deformation. A coldworked tensile strength in excess of 825 MPa (120,000 psi) and a ductility of at least 12%EL are desired. Furthermore, the final diameter must be 8.9 mm (0.35 in.). Explain how this may be accomplished.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 04.07.2019 19:10
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
Engineering, 04.07.2019 19:20
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
You know the right answer?
A cylindrical rod of 1040 steel originally 11.4 mm (0.45 in.) in diameter is to be cold worked by dr...
Questions
Arts, 30.11.2020 05:50
Chemistry, 30.11.2020 05:50
Mathematics, 30.11.2020 05:50
English, 30.11.2020 05:50
Mathematics, 30.11.2020 05:50
English, 30.11.2020 05:50
Mathematics, 30.11.2020 05:50
English, 30.11.2020 05:50
Mathematics, 30.11.2020 05:50
