Engineering, 15.04.2020 03:07 IsabellaGracie
A speed reducer has 20 deg full depth teeth and consisct of a 20 tooth steel spur pinion driving a 50 tooth cast iron gear. the horse power transmitted is 12 at a pinion speed of 1200 rev/min. for a dimateral pitch of 8 teeth/ in and a face width of 1.5 in find the contact stress. the yuong's modulus of the steel is 30E6 and young's modulus of cast iron is 15E6. use a poisson's ratio of 0.3 for both materials. use equation 14-14 to calc the contact stress in the gear only.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
Engineering, 05.07.2019 19:10
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
You know the right answer?
A speed reducer has 20 deg full depth teeth and consisct of a 20 tooth steel spur pinion driving a 5...
Questions
Computers and Technology, 16.12.2019 21:31
