subject
Engineering, 15.04.2020 03:50 KillerMDFK7992

A photovoltaic panel of dimensions 6 m x 5 m is located on top of the roof of a house. Solar irradiation Gs = 900 W/m² is incident on the panel. The panel has an absorptivity to solar irradiation, αₛ of 0.92. The freestream air temperature is Tɪɴꜰ and the surrounding temperature for radiation exchange with the sky is Tsᴜʀʀ. For this particular problem, it is given that Tɪɴꜰ = Tsᴜʀʀ. The convective heat transfer coefficient of air blowing over the panel is h W/m²-K.
The generated electric power is provided by the following expression:
Pᴇʟᴇᴄ = αₛ Gₛ Aᴘ*(A-B*Tᴘ),
where A = 0.61 and B = 0.0014 K⁻¹. The emissivity of the panel and its absorptivity to radiation in the wavelength range of the sky temperature are both equal to 0.7. In the above equation, Aᴘ is the solar panel area and Tᴘ is the panel temperature.
Heat conduction from the panel supports to the roof can be neglected, and so can the heat loss from the back side of the solar panel.
(1) Derive an expression for electrical power generated by the panel as a function of other known quantities.
(2) Plot the electrical power produced as a function of convective heat transfer coefficient h for a fixed air temperature of Tinf = 22 °C over a range of h from 20 to 40 W/m²-K. Provide appropriate reasoning to support the observed trend.
For (2), neglect irradiation from the surroundings. On the same graph as in (2), plot the new electrical power generated as a function of h. Does the electrical power produced change substantially? Comment on why or why not.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
A photovoltaic panel of dimensions 6 m x 5 m is located on top of the roof of a house. Solar irradia...
Questions
question
Mathematics, 18.02.2021 14:00
question
Mathematics, 18.02.2021 14:00
question
Mathematics, 18.02.2021 14:00
question
German, 18.02.2021 14:00
question
Social Studies, 18.02.2021 14:00
question
Computers and Technology, 18.02.2021 14:00
question
Mathematics, 18.02.2021 14:00
question
Mathematics, 18.02.2021 14:00
Questions on the website: 13722360