subject
Engineering, 15.04.2020 23:48 donnafranks2003

Troubleshooting Challenge 410A
bumity is 60.7%
Indoor dry bulb temp 80°F Indoor wet bulb temp 70°F
Refrigerant R410A
Outdoor ambient temp 89°F hot
Suction line temp 75°F
Liquid line temp 128ºF
Actual Condensing pressure 485 PSIG (131.1 °F)
Actual Evaporator pressure 144 PSIG (50.33 °F)
Diagnose the problem (Only one)
Low Evaporator Airflow (Low load)
Refrigerant Undercharged
Refrigerant Overcharged
High heat load (High Indoor Temperature or Leak in return duct)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
You know the right answer?
Troubleshooting Challenge 410A
bumity is 60.7%
Indoor dry bulb temp 80°F Indoor wet bulb...
Questions
question
Mathematics, 06.10.2019 10:01
Questions on the website: 13722360