Engineering, 16.04.2020 06:20 KatieQ1

1.Un mol de gas ideal está confinado bajo una presión constante P=20 atm. La temperatura se cambia de 100°C a 25 °C. Cv=3/2R. Calcular q, w, ΔE y ΔH.

2. Calcular el cambio de energía interna, calor y trabajo expresado en Joules y calorías, que realizan 2 moles de un gas ideal con Cv= 5/2R en los siguientes procesos:
a) Expansión isobara (V1= 2 L, V2= 5 L, p = 3 atm)
b) Expansión isoterma (V1 = 2 L, V2 = 5 L, t = 27°C)
c) Transformación isocora.

3. Tenemos tres moles de un gas monoatómico a 300 K. Calcular el incremento de energía interna, el trabajo, el incremento de entalpía y el calor puestos en juego en los siguientes procesos:
a) Proceso a presión constante
b) Proceso a volumen constante
Suponemos que la temperatura final para ambos procesos es de 270 K

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

You know the right answer?

1.Un mol de gas ideal está confinado bajo una presión constante P=20 atm. La temperatura se cambia d...

Questions