Engineering, 16.04.2020 15:12 reneewilliams20

The cost of delivering a package is based on the weight of the package. There is a flat fee of $5.00 for all packages. In addition to the flat fee, for packages between 2 pounds and 10 pounds there is a weight fee of $1.00 for every pound over 2 pounds. For packages over 10 pounds the weight fee is $5.00 for every pound over 10 pounds. If the package weights over 20 pounds but less than 100 pounds, the weight fee is $10.00 for every pound over 20 pounds. Packages over 100 pounds are not accepted. Write a program to accept the package weight from a user and then display the total cost to deliver the package.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

Answer

You know the right answer?

The cost of delivering a package is based on the weight of the package. There is a flat fee of $5.00...

Questions