Engineering, 16.04.2020 20:41 kimjooin02
A pressure vessel of 10-in. inner diameter and 0.25-in. wall thickness is fabricated from a 4-ft section of spirally-welded pipe AB and is equipped with two rigid end plates. The gage pressure inside the vessel is 310 psi and 30-kip centric axial forces P and P' are applied to the end plates. Determine the normal stress perpendicular to the weld and the shearing stress parallel to the weld. (Round the final answers to three decimal places.)
Answers: 3
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
A pressure vessel of 10-in. inner diameter and 0.25-in. wall thickness is fabricated from a 4-ft sec...
Mathematics, 01.06.2021 22:00
Geography, 01.06.2021 22:00
Mathematics, 01.06.2021 22:00
Mathematics, 01.06.2021 22:00
Mathematics, 01.06.2021 22:00
Mathematics, 01.06.2021 22:00
Mathematics, 01.06.2021 22:00
Mathematics, 01.06.2021 22:00
Mathematics, 01.06.2021 22:00
Chemistry, 01.06.2021 22:00