A concentrated load P is applied to the upper end of a 1.38-m-long pipe. The outside diameter of the pipe is D = 116 mm and the inside diameter is d = 104 mm.(a) Compute the value of Q for the pipe.(b) If the allowable shear stress for the pipe shape is 77 MPa, determine the maximum load P that can be applied to the cantilever beam.

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

On a average work day more than work place firs are reorted

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.