Engineering, 20.04.2020 22:45 shetherealbrat
Define initial set and final set. Briefly discuss one method used to determine them. The following laboratory tests are performed:
a. Setting time test of cement paste samples.
b. Compressive strength of mortar cubes.
What are the significance and use of each of these tests?
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Define initial set and final set. Briefly discuss one method used to determine them. The following l...
Chemistry, 20.09.2021 18:20
Biology, 20.09.2021 18:20
English, 20.09.2021 18:20
English, 20.09.2021 18:20
Mathematics, 20.09.2021 18:20
Mathematics, 20.09.2021 18:20
Mathematics, 20.09.2021 18:20
Mathematics, 20.09.2021 18:20
Mathematics, 20.09.2021 18:20
Health, 20.09.2021 18:20
Chemistry, 20.09.2021 18:20
Mathematics, 20.09.2021 18:20
Mathematics, 20.09.2021 18:20