Engineering, 21.04.2020 23:45 yeet74
If the water density is 1000 kg/m3, Q = 0.1 liters/sec, the gauge pressure upstream of the needle valve is 33 psig, the radius of the Pelton turbine rotor is 0.03 m, the frequency with which the turbine rotates is 37 Hz, and the jet speed is V = 3.5 m/s, answer the following: What is the tangential velocity, U, of the buckets on the rotor? What are the theoretical values of the output torque and power, assuming two different deflection angles: 180o and 165o?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
If the water density is 1000 kg/m3, Q = 0.1 liters/sec, the gauge pressure upstream of the needle va...
Questions
History, 15.10.2019 04:30
Social Studies, 15.10.2019 04:30
Chemistry, 15.10.2019 04:30
Mathematics, 15.10.2019 04:30
Computers and Technology, 15.10.2019 04:30
English, 15.10.2019 04:30
Physics, 15.10.2019 04:30
Mathematics, 15.10.2019 04:30
