Engineering, 22.04.2020 01:26 elijah207
An internally reversible heat engine (power cycle) operates between reservoir temperatures of 397℃ and 7℃, and the heat rejection rate is 2kW. The total net work output of the engine is used to drive an internally reversible heat pump, which is supplied by heat transfer at 7℃ and rejects heat at a temperature of 40℃. Determine a) The efficiency of the reversible heat engine and the COP of the reversible heat pump (6 points) b) The power output of the heat engine, in kW (6 points) c) The heat supplied to the heat pump, in kW (6 points) d) An overall COP for the combined device, which is defined as the energy delivered to the home divided by the initial energy supplied to the heat engine (4 points)
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Engineering, 06.07.2019 03:30
The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40°c and an evaporating temperature of -4°c shows a refrigeration capacity of 115 kw. at this operating point, the motor (its efficiency is 90 percent) draws 34.5 kw. the bore of the cylinders is 87 mm and the piston stroke is 70 mm. the performance data are based on 8°c of sub-cooling of the liquid leaving the condenser. compute (a) the actual volumetric efficiency and (b) the compression efficiency.
Answers: 2
You know the right answer?
An internally reversible heat engine (power cycle) operates between reservoir temperatures of 397℃ a...
Questions
