Engineering, 22.04.2020 20:53 tankddd
What is the magnitude of the maximum stress that exists at the tip of an internal crack having a radius of curvature of 3 × 10-4 mm (1.181 × 10-5 in.) and a crack length of 2.5 × 10-2 mm (0.9843 × 10-3 in.) when a tensile stress of 170 MPa (24660 psi) is applied?
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
What is the magnitude of the maximum stress that exists at the tip of an internal crack having a rad...
Mathematics, 07.12.2021 05:10
Mathematics, 07.12.2021 05:10
History, 07.12.2021 05:10
Advanced Placement (AP), 07.12.2021 05:10
Social Studies, 07.12.2021 05:10
History, 07.12.2021 05:10
Mathematics, 07.12.2021 05:10
Social Studies, 07.12.2021 05:10
History, 07.12.2021 05:10
Chemistry, 07.12.2021 05:10
Law, 07.12.2021 05:10