Engineering, 23.04.2020 00:51 carlo123
A slab-milling operation is carried out on a high-strength steel block that has a specific energy of 1.3 hp*min/in3, a length of 20 in, and a width of 6 in, at a feed of 0.01 in/tooth and a depth of cut of 0.15 in. The cutter rotates at 150 rpm and has a diameter of 3 in with 8 straight cutting teeth. Calculate the material removal rate and the cutting time, and estimate the power required.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
You know the right answer?
A slab-milling operation is carried out on a high-strength steel block that has a specific energy of...
Questions
English, 24.08.2021 01:00
Mathematics, 24.08.2021 01:00
Mathematics, 24.08.2021 01:00
Mathematics, 24.08.2021 01:00
Mathematics, 24.08.2021 01:00
History, 24.08.2021 01:00
Mathematics, 24.08.2021 01:00
Mathematics, 24.08.2021 01:00
Computers and Technology, 24.08.2021 01:00
Computers and Technology, 24.08.2021 01:00
