subject
Engineering, 24.04.2020 20:00 TerronRice

A fluid is heated by flowing inside a 60-mm-diameter and 30-m-long circular tube with a flow rate of 0.6 kg/s. The surface temperature of the tube is maintained at 160โ„ƒ. Evaluating the average fluid properties to be ยต = 0.031 kg/m โˆ™ s, Pr=480, k = 0.125 W/m โˆ™ K, cp = 2131 /kg โˆ™ K. If the fluid enters at 25โ„ƒ, 1) What is the outlet temperature? 2) What is the total heat transfer rate for the tube?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg โ€ข k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
A fluid is heated by flowing inside a 60-mm-diameter and 30-m-long circular tube with a flow rate of...
Questions
question
Mathematics, 23.06.2019 19:30
Questions on the website: 13722362