Engineering, 24.04.2020 23:50 masie03
- A 208 V, 50 Hz six pole, Y-connected, 27 hp design class B induction motor is tested in the laboratory, with the following results: No load: 208 V, 22.0 A, 1200 W, 50 Hz Locked rotor: 24.6 V, 64.5 A, 2200 W, 15 Hz DC test: 13.5 V, 64 A Find the equivalent circuit of this motor, and plot its torque-speed characteristic
Answers: 2
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30Β°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.
Answers: 2
- A 208 V, 50 Hz six pole, Y-connected, 27 hp design class B induction motor is tested in the labora...
Mathematics, 28.09.2019 17:30
Physics, 28.09.2019 17:30
Biology, 28.09.2019 17:30
Computers and Technology, 28.09.2019 17:30
Geography, 28.09.2019 17:30
Mathematics, 28.09.2019 17:30
Physics, 28.09.2019 17:30