Engineering, 25.04.2020 01:15 anna80544
A turbojet is flying with a velocity of 900 ft/s at an altitude of 20,000 ft, where the ambient conditions are 7 psia and 10°F. The pressure ratio across the compressor is 13, and the temperature at the turbine inlet is 2400 R. Assume ideal operation for all components and constant specific heats for air at room temperature. The properties of air at room temperature are cp = 0.24 Btu/lbm*R and k = 1.4.
(a) The pressure at the turbine exit.
(b) The velocity of the exhaust gases, and (c) the propulsive efficiency.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
A turbojet is flying with a velocity of 900 ft/s at an altitude of 20,000 ft, where the ambient cond...
History, 10.01.2021 17:00
Social Studies, 10.01.2021 17:00
Chemistry, 10.01.2021 17:00
Mathematics, 10.01.2021 17:00
Social Studies, 10.01.2021 17:00
Business, 10.01.2021 17:00
Business, 10.01.2021 17:00
English, 10.01.2021 17:00
Mathematics, 10.01.2021 17:00
Mathematics, 10.01.2021 17:10
Biology, 10.01.2021 17:10
English, 10.01.2021 17:10
Mathematics, 10.01.2021 17:10
Biology, 10.01.2021 17:10
Mathematics, 10.01.2021 17:10
Social Studies, 10.01.2021 17:10