subject
Engineering, 25.04.2020 03:11 lberries08

A girder that carries a uniformly distributed dead load of 1.7 k/ft plus its self-weight and three concentrated live loads of 15 kips at the quarter points of the 36 ft span is to be sized. Using A992 steel, determine the lightest Wshape to carry the load with lateral supports provided at the supports and load points. Use the correct Cb, check shear, and limit deflection to 1/360 of span.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15Β°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70Β°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
You know the right answer?
A girder that carries a uniformly distributed dead load of 1.7 k/ft plus its self-weight and three c...
Questions
question
Computers and Technology, 29.01.2020 12:00
Questions on the website: 13722360