subject
Engineering, 06.05.2020 02:04 bri1334

A house, for cooling purposes, consists of two zones: the attic area zone A and the living area zone B. The living area is cooled by an air conditioning unit that removes 30,000 Btu/hr. The heat capacity of zone B is 1/3 oF per thousand Btu. The time constant for heat transfer between zone A and the outside is 3 hr, between zone B and the outside is 4 hr, and between the two zones is 6 hr. If the outside temperature stays at 110 oF, how warm does it eventually get in the attic zone A

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
A house, for cooling purposes, consists of two zones: the attic area zone A and the living area zone...
Questions
Questions on the website: 13722363