Engineering, 06.05.2020 02:06 Mumi2232

To be able to describe the motion of rigid bodies by applying the conservation of linear and angular momenta. If the sum of all the linear impulses acting on a system of connected rigid bodies is zero, the linear momentum of the system is conserved. Mathematically, this relationship is expressed as (∑syst. linearmomentum)1=(∑syst. linearmomentum)2 and is called the conservation of linear momentum. If the sum of all the angular impulses (created by the external forces that act on the system) is negligible or zero, then the angular momentum of a system of connected rigid bodies is conserved about the system's center of mass or about a fixed point. Mathematically, this relationship is expressed as (∑syst. angularmomentum)1=(∑syst. angularmomentum)2 and is called the conservation of angular momentum.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the main objective of using reheat rankine cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

To be able to describe the motion of rigid bodies by applying the conservation of linear and angular...

Questions