Engineering, 06.05.2020 00:12 emmeaw245

Using the data given below, calculate the drop in the temperature of molten aluminum as it flows in a 15 cm long round channel of 2 cm diameter in a water-cooled die and what will be the temperature drop if the metal were to flow through a 15 cm long channel having a square cross-section (side = 2 cm) in an identical mold? Assume that Al enters the channel at 800 C. The average flow velocity is 4 cm/s. Given: density of Al=2.2 g/cm3, specific heat of Al=0.28 cal/g. K, mold-metal interface heat transfer coefficient=0.01 cal/cm2.s. K, and the die temperature=27 C (assumed constant).

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

You know the right answer?

Using the data given below, calculate the drop in the temperature of molten aluminum as it flows in...

Questions