Engineering, 05.05.2020 09:05 kroe417

A plane wall (k = 1 W/mK) has a thickness of 0.3 m, height of 2 m, and width of 1 m. It undergoes uniform volumetric heat generation of 1,000 W/m3. The left side of the wall is insulated and the right side is cooled via convection with a heat transfer coefficient of 5 W/m2K and an air temperature of 25Â°C. Fins (k = 1 W/mK) are attached to the right hand side of the wall (fins do not generate heat). The fins are rectangular and span the width of the wall with a thickness of 10 mm and a length of 75 mm. The spacing between fins along the heigth of the wall is 20 mm.

find the temperature of the wall in contact with the air (the base of the fins).

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

You know the right answer?

A plane wall (k = 1 W/mK) has a thickness of 0.3 m, height of 2 m, and width of 1 m. It undergoes un...

Questions