Engineering, 05.05.2020 04:01 hayleneolide
Steam produced in a boiler is frequently "wet"âthat is, it is a mist composed of saturated water vapor and entrained liquid droplets. The quality of a wet steam is defined as the fraction of the mixture by mass that is vapor. Wet steam at a pressure of 5.0 bar with a quality of 0.85 is isothermally "dried" by evaporating the entrained liquid in the mist. The flow rate of the dried steam is 52.5m3/h.
Use the steam tables to determine the temperature at which this operation occurs, the specific enthalpies of the wet and dry steams, and the total mass flow rate of the process stream.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
You know the right answer?
Steam produced in a boiler is frequently "wet"âthat is, it is a mist composed of saturated water vap...
Questions
History, 18.11.2019 21:31
Arts, 18.11.2019 21:31
