Engineering, 05.05.2020 04:24 yeeeeeeeeeeet21

Carbon disulfide has the following physical properties:Flashpoint -22Â°FBoiling point 46.5Â°CDensity 1.261Vapor density 2.64Lower flammable limit 1.3%Upper flammable limit 50%8-hour TWA PEL 20 ppm

An industrial process liberates 3 cubic feet of carbon disulfide per hour into a room that measures 10 feet by 20 feet and has a ceiling height of 8 feet.

(a) Calculate the minimum general exhaust ventilation (cubic feet/hour) necessary to prevent a general safety hazard for the process.
(b) Calculate the minimum general exhaust ventilation (cubic feet/hour) necessary to prevent a general health hazard for the process.
(c) Carbon disulfide is which of the following: 1. Class IA flammable liquid 2. Class IB flammable liquid 3. Class IC flammable liquid 4. Class II combustible liquid 5. Class III combustible liquid

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

Answer

You know the right answer?

Carbon disulfide has the following physical properties:Flashpoint -22Â°FBoiling point 46.5Â°CDensity...

Questions