Engineering, 03.05.2020 14:20 coolman12062

Suppose a consumer advocacy group would like to conduct a survey to find the proportion p of consumers who bought the newest generation of mobile phone were happy with their purchase.
(a) How large a sample n should they take to estimate p with 2% margin of error and 90% confidence?
(b) The advocacy group took a random sample of 1000 consumers who recently purchased this mobile phone and found that 400 were happy with their purchase. Find
a 95% confidence interval for p.

Answers: 1

Show answers

Answers

Answer from: blake2001

A) The size of the sample they should take to estimate p with 2% margin of error and 90% confidence is; n = 1691

B) The 95% confidence interval for p is;

We are 95% confident that the true proportion of customers that are happy with their purchase is between 0.3696 and 0.4304.

A) We know that formula for margin of error is;

E = z√(p^(1 - p^)/n)

We are given;

E = 2% = 0.02

Confidence level = 90%

Now, we are not given the proportion and so we will adopt nominal p^ = 0.05

critical value at CL of 90% is 1.645.

Thus, making n the subject we have;

n = z²(p^(1 - p^))/E²

n = 1.645²(0.5 * 0.5)/0.02²

n = 1691.266

n ≈ 1691

B) n = 1000

p^ = 400/1000 = 0.4

Confidence level = 95%

Formula for confidence interval;

CI = p^ ± z√(p^(1 - p^)/n)

critical value at CL 95% is 1.96

Thus;

CI = 0.4 ± 1.96√(0.4(1 - 0.4)/1000)

CI = 0.4 ± 0.0304

CI = (0.3696, 0.4304)

We are 95% confident that the true proportion of customers that are happy with their purchase is between 0.3696 and 0.4304.

Read more about confidence interval at; link

Answer from: ambermcghee

a) Sample size = 1691

b) 95% Confidence Interval = (0.3696, 0.4304)

Explanation:

(a) How large a sample n should they take to estimate p with 2% margin of error and 90% confidence?

The margin of error is given by

$MoE = z \cdot \frac{\sqrt{p(1-p)} }{\sqrt{n} } \\\\$

Where z is the corresponding z-score for 90% confidence level

z = 1.645 (from z-table)

for p = 0.50 and 2% margin of error, the required sample size would be

$n = \frac{1.645^{2} \cdot 0.50(1-0.50)}{0.02^{2}} \\\\n = \frac{0.6765}{0.0004} \\\\n = 1691\\$

(b) The advocacy group took a random sample of 1000 consumers who recently purchased this mobile phone and found that 400 were happy with their purchase. Find a 95% confidence interval for p.

The sample proportion is

p = 400/1000

p = 0.40

z = 1.96 (from z-table)

n = 1000

The confidence interval is given by

$CI = p \pm z \cdot \sqrt{\frac{p(1-p)}{n} } \\\\CI = 0.40 \pm 1.96 \cdot \sqrt{\frac{0.40(1-0.40)}{1000} } \\\\CI = 0.40 \pm 1.96 \cdot 0.01549 \\\\CI = 0.40 \pm 0.0304 \\\\CI = 0.40 - 0.0304 \: and \: 0.40 + 0.0304\\\\CI = (0.3696 ,\: 0.4304)$

Therefore, we are 95% confident that the proportion of consumers who bought the newest generation of mobile phone were happy with their purchase is within the range of (0.3696, 0.4304)

What is Confidence Interval?

The confidence interval represents an interval that we can guarantee that the target variable will be within this interval for a given confidence level.

Answer from: Quest

answering the question, i caught myself thinking that I was insanely excited, do you want to have some fun?

write me here https://linktr.ee/danis1704 my username danis1704

waiting for you <3

Answer from: Quest

answer:

Explanation:

hdjd

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

You know the right answer?

Suppose a consumer advocacy group would like to conduct a survey to find the proportion p of consume...

Questions