It is proposed to deposit a 5 μm thick nickel coating uniformly on all surfaces of a ceramic strip measuring 15 cm x 5 cm x 2 cm by employing a vapor-phase deposition (evaporation-condensation) technique. The vapor pressure-temperature relationship for liquid Ni is of the following form:

ln p (atm) = -(51,590/T) – 2.01 ln T + 32.40.

The normal melting point and boiling point of nickel are 1453°C and 2730°C, respectively, and the density and atomic weights of Ni are 8.91 g. cm^-3 and 58.71 atomic mass units respectively. Calculate the energy in joules needed to evaporate the required quantity of nickel.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)