subject
Engineering, 05.05.2020 04:42 biancaadenisee2

A defrost heater is integrated with the sun roof glass in order to prevent ice from forming. The sun roof begins at L1 = 0.3 m from the front of the roof and extends to L2 = 0.6 m. The roof is W = 1.2 m wide. The car is driving at u[infinity] = 10 m/s through air at T[infinity] = -15°C. Assume that the properties of the air are conductivity k = 0.023 W/m-K, density  = 1.3 kg/m3 , viscosity  = 1.65x10-5 Pa-s, and specific heat capacity c = 1003 J/kg-K. The defrost heater is a thin sheet of electrically resistive material that covers the entire sun roof and transfers a uniform heat flux to the glass. The convection coefficient between the interior surface of the roof and the cabin air is sufficiently low that convection heat transfer with the interior can be neglected. Assume that the flow over the roof remains laminar. Do not use a correlation to solve this problem; instead, use your conceptual knowledge of boundary layer behavior to estimate the answers

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A defrost heater is integrated with the sun roof glass in order to prevent ice from forming. The sun...
Questions
question
Mathematics, 26.06.2020 17:01
Questions on the website: 13722363