subject
Engineering, 05.05.2020 16:42 19thomasar

Water from a tank with pressure P is pumped with power 40 W and flow rate Q = 0.005 m3/s through a pipe system with diameter D= 3 cm except at the end with diameter d= 1 cm, where it jets into air at Patm. Find the pressure P in the tank. All pipes have roughness height =0.01 mm and each pipe segment has length of 2 m. The entrance loss coefficient is KL = 0.2, and the contraction between D and d has KL = 1.1 based on the velocity on the low speed side. The loss coefficients for elbows 3 and 4 are both KL = 0.35. Where are the most significant losses come from? (Hint: you need to consider the shaft work (the pump "head"))

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate Γ t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
Water from a tank with pressure P is pumped with power 40 W and flow rate Q = 0.005 m3/s through a p...
Questions
question
Business, 18.03.2021 16:40
question
Mathematics, 18.03.2021 16:40
question
Mathematics, 18.03.2021 16:40
question
Mathematics, 18.03.2021 16:40
Questions on the website: 13722367