Engineering, 05.05.2020 20:28 Twitches

A two-stage cascade refrigeration system is to provide cooling at -40ºC while operating with the high-temperature condenser at 1.6 MPa. Each stage operates on the ideal vapor-compression refrigeration cycle. The upper vapor compression refrigeration system uses water as its working fluid and operates its evaporator at 5ºC. The lower cycle uses refrigerant-134a as its working fluid and operates its condenser at 400 kPa. This system produces a cooling effect at 20 kJ/s. Determine (a) The heat transfer rate within the heat exchanger connecting the two refrigeration systems. (b) The mass flow rate of R-134a and water in their respective cycles, and (c) The required heat transfer area A inside the heat exchanger if the overall heat transfer coefficient U is 25 W/m2K . (25 pt.)

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

Answer

You know the right answer?

A two-stage cascade refrigeration system is to provide cooling at -40ºC while operating with the hig...

Questions