The following two questions refer to the circuit below. Consider a non-ideal op amp where the output can saturate. The open loop gain A = 2 x 10^{4}10 4 , where v_{o}v o =−Av_{s}v s . The positive supply voltage for the op-amp is +V_S = 15+V S =15V. The negative supply voltage for the op-amp is -V_S = -10−V S =−10V. What is the most positive value v_{s}v s can take before the amplifier saturates? Express your answer in mV and omit units from your answer.

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k