A thin-walled tube having internal and external diameters of 0.25 m and 0.26 m is subject to an internal pressure of pi=2.8 MPa, a twisting moment of 31.36 kN. m, and an axial end thrust (tension) P=45 kN. The ultimate strengths in tension and in compression are 210 MPa and 500 MPa, respectively. Determine if failure has occurred using the following theories of failure. a) Maximum-shear-stress theory b) Coulomb-Mohr theory c) Maximum-principal-stress theory d) Tresca Theory

What precautions should you take to prevent injuries when dealing with heavy loads?

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um