Engineering, 21.05.2020 00:07 PopRoxs20

Show Work Please

The existing Fell City wastewater treatment plant has a complete mix activated sludge biological reactor following a primary settling tank. A local company proposes to build a candy factory and to send its wastewater to the Fell City plant. The factory’s BOD is substantial but it is all dissolved, so the proposal is to pipe it directly to the biological reactor. Over the next five years, the city flow is expected to grow to 9800 m3/d (the 2025 flow). The existing reactor has a volume of 12,000 m3. Given the following information, determine the maximum flow that the wastewater plant can accept from the factory (in 2025) and still produce an effluent BOD of 25 mg/L.

City raw wastewater BOD = 200 mg/L

Factory BOD = 850 mg/L

Degradation reaction coefficient for BOD = 8.4/d

(This is not the coefficient to convert between BOD5 and BODu.)

Show Work Please

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

Answer

You know the right answer?

*Show Work Please*

The existing Fell City wastewater treatment plant has a complete mix...

Questions