Engineering, 23.05.2020 01:58 Alayna1037
From the following numbered list of characteristics, decide which pertain to (a) precipitation hardening, and which are displayed by (b) dispersion strengthening.
(1) The strengthening mechanism involves the hindering of dislocation motion by precipitates/particles.
(2) The hardening/strengthening effect is not retained at elevated temperatures for this process
(3) The hardening/strengthening effect is retained at elevated temperatures for this process
(4) The strength is developed by a heat treatment
(5) The strength is developed without a heat treatment
(a) 1,3,5 (b) - 1,2,4
(a) 3,5 (b) 1,2,4
(a) 1,2,4 (b) 3,5
(a) 1,2,4 (b) - 1,3,5
(a)-1,3,4 (b) . 1,2,5
Answers: 3
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
From the following numbered list of characteristics, decide which pertain to (a) precipitation harde...
History, 10.07.2019 03:30
History, 10.07.2019 03:30
Biology, 10.07.2019 03:30
Mathematics, 10.07.2019 03:30
Social Studies, 10.07.2019 03:30