Engineering, 23.05.2020 04:01 soliseric879

An activated sludge system has a single aeration basin with a volume of 300,000 gal and 2 - 25 ft. diameter secondary clarifiers. The influent flow is 1.1 MGD and the influent BOD5 and TSS are 160 mg/L and 190 mg/L respectively. The mixed liquor suspended solids concentration is 2500 mg/L and the recycle suspended solids concentration is 6800 mg/L. The sludge recycle flow rate is 0.60 MGD and the solids residence time is 9 days. (1 gallon = 3.79L)
A. Calculate the volumetric BODs loading rate on the acration basin in units of lbs/1000 ft.
B. Calculate the F:M ratio in units of g-B0Ds/g-TSS.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

You know the right answer?

An activated sludge system has a single aeration basin with a volume of 300,000 gal and 2 - 25 ft. d...

Questions