subject
Engineering, 23.05.2020 05:05 deedeesmoke113057

A gymnast practices a handstand outside on two exercise platforms. A breeze is blowing in the positive x-direction and creates a distributed force Fbreeze along the length of her body. She abducts her left hip by 45 degrees while maintaining the handstand. In the model below, the total mass of torso and arms are treated as a point mass mtorso centered along the length of the torso, and the legs are treated as point masses mleg centered at the knees. The exercise platforms are assumed to be located directly below the shoulder joints, vertically aligned. Assume that the gymnast does not apply a moment on the platforms.
lknee = 0.40 m
Itorso = 0.60 m
larm = 0.60 m
Ihip = 0.15 m
Iclay = 0.15 m
lleg = 0.80 m
Mleg = 12.5 kg
mtorso = 35.0 kg
F breeze = 2.0 N/m
a) Given the anatomical dimensions and masses, determine forces FL and Fr at the gymnast's hands. Solve the problem symbolically first, then numerically, and show your work for each part.
b) The vertical supports for the exercise platforms are single 10.0 cm long hollow cylinders with outer diameters of 2.0 cm and inner diameters of 1.5 cm. If the support material has an elastic modulus of E = 100 GPa, how much will each of the exercise platforms move downward?
c) How strong would the breeze have to be to knock the gymnast of balance, causing her right hand to lift off the ground?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
A gymnast practices a handstand outside on two exercise platforms. A breeze is blowing in the positi...
Questions
Questions on the website: 13722361