subject
Engineering, 24.05.2020 01:58 xman32201

Consider a clay layer that is 1 m thick. The clay has a compression index of 0.35, a swell index of 0.07, a permeability of 4 x 10-7 cm/sec, a preconsolidation pressure of 172 kPa and a coefficient of consolidation of 2.7 x 10-4 cmimin The initial effective stress at the midpoint of the layer is 140 kPa, and the soil has a void ratio of 1.01. The stress is increased to 200 kPa. The soil is drained above and below. The total primary consolidation expected is 4.40 cm. How much time in days is required for 2.0 cm of primary settlement to occur?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
You know the right answer?
Consider a clay layer that is 1 m thick. The clay has a compression index of 0.35, a swell index of...
Questions
question
Arts, 30.11.2020 21:30
Questions on the website: 13722363