Engineering, 29.05.2020 20:00 sassyunicorngir

Consider a Carnot heat pump cycle executed in a steady-flow system in the saturated mixture region using R-134a flowing at a rate of 0.264 kg/s. The maximum absolute temperature in the cycle is 1.15 times the minimum absolute temperature, and the net power input to the cycle is 5 kW. If the refrigerant changes from saturated vapor to saturated liquid during the heat rejection process, determine the ratio of the maximum to minimum pressures in the cycle.

Answers: 2

Show answers

Another question on Engineering

Engineering, 06.07.2019 03:10

An electrical kettle is made out of stainless steel,weighs two pounds (when empty) with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling.

Answers: 1

Answer

Engineering, 06.07.2019 05:10

An ideal vapor-compression refrigeration cycle is employed to maintain a building temperature of 23°c when the outside temperature is 37°c. the cycle operates at steady state using ammonia as the working fluid. the mass flow rate of the refrigerant is 15 kg/min. the refrigerant enters the compressor at 1.5 bar and 10 °c. the condenser pressure is 20 bar and the temperature at the condenser exit is 45 °c. determine (a) the compressor power in kw. (b) the refrigeration capacity in tons. (c) the coefficient of performance. d) the maximum theoretical coefficient of performance.

Answers: 2

Answer

Engineering, 11.07.2019 01:10

1a)-solve the following differential equation using laplace transforms. assume zero initial conditions x(t) +2x(t)= 4us(t) 2b)- plot the solution x(t) as a function of t specify the time constant and the steady-state step response value xss on the graph.

Answers: 1

Answer

Engineering, 11.07.2019 01:10

Afelix baumgartner had an estimated mass of 120 kg and a frontal area of 0.9 m 2. he pulled his parachute at 2.5 km where the density of the atmosphere is p 0.957 kgim. at low speeds his drag coefficient is estimated to be cd 0.75 (a) draw a free body diagram of felix (b) determine his terminal velocity (c) determine his power dissipated by the aerodynamic drag

Answers: 2

Answer

You know the right answer?

Consider a Carnot heat pump cycle executed in a steady-flow system in the saturated mixture region u...

Questions