subject
Engineering, 02.06.2020 15:57 shanua

1. When 3 binary links are connected together by the same pin, we can say that system has .
Group of answer choices:
O 0 joints
O 3 joints
O 2 joints
O 1 joint
2. An example of Mobility of half would be .
Group of answer choices:
O a roller that can rotate and translate
O a ball and socket joint
O a slider that translates only
O a link that can rotate only
3. The Kutzbach equation differs from that of the Huebler because the Gruebler takes into account half a joint distinctively.
Group of answer choices:
OTrue
O False

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
You know the right answer?
1. When 3 binary links are connected together by the same pin, we can say that system has .
Gr...
Questions
question
English, 18.12.2019 17:31
question
Chemistry, 18.12.2019 17:31
Questions on the website: 13722362