Engineering, 02.06.2020 10:58 boogerbuttday

Because A-B=A+ (-B), the subtraction of signed numbers can be accomplished by adding the complement. Subtract each of the following pairs of 5-bit binary numbers by adding the complement of the subtrahend to the minuend. Indicate when an overflow occurs. Assume that negative number are represented in 1’s complement. Then repeat using 2’s complement.

a) 01001-11010b) 11010-11001c) 10110-01101d) 11011-00111e) 11100-10101

Answers: 2

Show answers

Answers

Answer from: pankajyadav7402

Using 1's complement

Therefore the difference is -10001

Therefore the difference is 00001

Therefore the difference is 01001

Therefore the difference is 10100

Therefore the difference is 00111

Explanation:

Using 1's complement

a) The 1's complement of the subtrahend 11010 = 00101.

Therefore 01001-11010 = 01001 + 00101 = 01110

Since no overflow, we take the 1's complement of the result and it is negative.

Therefore the difference is -10001

b) The 1's complement of the subtrahend 11001 = 00110.

Therefore 11010-11001 = 11010 + 00110 =1 00000

Since there is an overflow, we add the overflow to the result

Therefore the difference is 00001

c) The 1's complement of the subtrahend 01101 = 10010

Therefore 10110-01101 = 10110 + 10010 = 1 01000

Since there is an overflow, we add the overflow to the result

Therefore the difference is 01001

d) The 1's complement of the subtrahend 00111 = 11000

Therefore 11011-00111= 11011 + 11000 = 1 10011

Since there is an overflow, we add the overflow to the result

Therefore the difference is 10100

e) The 1's complement of the subtrahend 10101 = 01010

Therefore 11100-10101= 11100 + 01010 = 1 00110

Since there is an overflow, we add the overflow to the result

Therefore the difference is 00111

Using 2's complement

a) The 2's complement of the subtrahend 11010 = 00110.

Therefore 01001-11010 = 01001 + 00110 = 01111

Since no overflow, we take the 2's complement of the result and it is negative.

Therefore the difference is -10001

b) The 2's complement of the subtrahend 11001 = 00111.

Therefore 11010-11001 = 11010 + 00111 =1 00001

Since there is an overflow, we drop the overflow

Therefore the difference is 00001

c) The 1's complement of the subtrahend 01101 = 10011

Therefore 10110-01101 = 10110 + 10011 = 1 01001

Since there is an overflow, we drop the overflow

Therefore the difference is 01001

d) The 1's complement of the subtrahend 00111 = 11001

Therefore 11011-00111= 11011 + 11001 = 1 10100

Since there is an overflow, we drop the overflow

Therefore the difference is 10100

e) The 1's complement of the subtrahend 10101 = 01011

Therefore 11100-10101= 11100 + 01011 = 1 00111

Since there is an overflow, we drop the overflow

Therefore the difference is 00111

Answer from: Quest

yes indeed

mayonaise pizza

good

dad gone me

Answer from: Quest

explanation:

an electrode is a metal whose surface serves as the location where oxidation-reduction equilibrium is established between the metal and what is in the solution.

Another question on Engineering

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w

Answers: 2

Answer

You know the right answer?

Because A-B=A+ (-B), the subtraction of signed numbers can be accomplished by adding the complement....

Questions