Engineering, 03.06.2020 00:57 helpmeplz33
Find the requested quantities for the circuit. We used the mesh-current method to identify the meshes. We then identified the mesh currents and wrote a KVL equation for each mesh and a constraint equation for the dependent source that defines its controlling variable in terms of the mesh currents. We solved these equations simultaneously for the unknown mesh currents and constrained current, and we checked the solution by verifying that the power in the circuit balances Now use the mesh-current values to calculate the voltage v0 and the total power generated in the circuit. Enter your answers directly on the figure.
Answers: 2
(from the circuit)
![V_o [ \dfrac{1}{12.5}+\dfrac{1}{50}+\dfrac{1}{10}-\dfrac{75}{500}] = \dfrac{50}{12.5}](/tpl/images/0674/2127/258a8.png)
![V_o[ \dfrac{500*500+12.5*5000+12.5*5000*5-75*12.5*500}{12.5*50*10*500}]= \dfrac{50}{12.5}](/tpl/images/0674/2127/560b8.png)
Another question on Engineering
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Find the requested quantities for the circuit. We used the mesh-current method to identify the meshe...
Questions
Mathematics, 28.04.2021 15:00
English, 28.04.2021 15:00
Mathematics, 28.04.2021 15:00
Physics, 28.04.2021 15:00
Geography, 28.04.2021 15:10
English, 28.04.2021 15:10
English, 28.04.2021 15:10
