subject
Engineering, 06.06.2020 04:02 farrellandnandi

Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway is a world leader on offshore concrete platforms with 1a of the world’s 30 larger offshore concrete structures located on the Norwegian continental shelf. The first of these platforms where the Ekofisk Tank installed in 1974 and the last was Troll gravity based structure installed in 1996. The Sakhalin project is located in a harsh and artic environment where concrete structures have proven excellent characteristics with a minimum of maintenance. 80 mm slump value is required for the Sakhalin project. 28-days concrete characteristic strength is 2b MPa. It is required that no more than 1 test result in 100 will fall below the specified strength. The fine aggregate has a fineness modulus of 2.60 and Zone 3. For Coarse Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.65, Absorption Capacity: 2.b %, Total Moisture: 1.c % and Dry Rodded Unit Weight: 1345 kg/m3. For Fine Aggregate (Uncrushed): SSD Bulk Specific Gravity: 2.70, Total Moisture: 3.d % and Free Moisture: 2 %. Cement: Portland Composite Cement, Specific Gravity: 2.97. For 0.e5 m3 of concrete, binder amount is calculated as 120 kg (Use ACI Method of Mix Design) Note:(a is 8 b is 6 c is 1 d is 9 e is 9)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
You know the right answer?
Q1) Design a concrete mixture proportions which will be used for offshore concrete platform. Norway...
Questions
Questions on the website: 13722360