The temperature distribution across a wall 0.3 m thick at a certain instant of time is T(x) a bx cx2 , where T is in degrees Celsius and x is in meters, a 200 C, b 200 C/m, and c 30 C/m2 . The wall has a thermal conductivity of 1 W/mK. (a) On a unit surface area basis, determine the rate of heat transfer into and out of the wall and the rate of change of energy stored by the wall. (b) If the cold surface is exposed to a fluid at 100 C, what is the convection coefficient

the rate of heat transfer into the wall is

the rate of heat output is

the rate of change of energy stored by the wall is

the convection coefficient is h = 4.26 W/m².K

Explanation:

From the question:

The temperature distribution across the wall is given by :

where;

T = temperature in ° C

and a, b, & c are constants.

replacing 200° C for a, - 200° C/m for b and  30° C/m² for c ; we have :

According to the application of Fourier's Law of heat conduction.

where the rate of heat input ; Then x= 0

So:

Thus , the rate of heat transfer into the wall is

The rate of heat output is:

; where x = 0.3

replacing T with and k with 1 W/m.K

Therefore , the rate of heat output is

Using energy balance to determine the change of energy(internal energy) stored by the wall.

Thus; the rate of change of energy stored by the wall is

We all know that for a steady state, the heat conducted to the end of the plate must be convected to the surrounding fluid.

So:

where;

h is the convective heat transfer coefficient.

Then:

We have:

182 = h(200-200×0.3 + 30 ×0.3² - 100 )

182 = h (42.7)

h = 4.26 W/m².K

Thus, the convection coefficient is h = 4.26 W/m².K

hi

explanation:

answer: 500 wph.

explanation: