A spherical tank for storing gas under pressure is 25 m in diameter and is made of steel 15 mm thick. The yield point of the material is 240 MPa. A factor of safety of 2.5 is desired. The maximum permissible internal pressure is most nearly: 90 kPa 230 kPa 430 kPa D. 570 kPa csauteol psotolem here Pcr 8. A structural steel tube with a 203 mm x 203 mm square cross section has an average wall thickness of 6.35 mm. The tube resists a torque of 8 N m. The average shear flow is most nearly A. 100 N/m
B. 200 N/m
C. 400 N/m
D. 800 N/m

Following are the solution to the given question:

Calculating the allowable stress:

Calculating the Thickness:

The stress in a spherical tank is defined as

Calculating the shear flow:

Therefore, the final answer is "".

Learn more:

link

1) 2304 kPa

2) B. 200 N/m

Explanation:

The internal pressure of the of the tank  can be found from the following relations;

Resisting wall force F = p×(1/4·π·D²)

σ×A = p×(1/4·π·D²)

Where:

σ = Allowable stress of the tank

A = Area of the wall of the tank = π·D·t

t = Thickness of the tank = 15 mm. = 0.015 m

D = Diameter of the tank = 25 m

p = Maximum permissible internal pressure pressure

∴ σ×π·D·t = p×(1/4·π·D²)

p = 4×σ×t/D = 4 × 240 ×0.015/2.5 = 5.76 MPa

With a desired safety factor of 2.5, the permissible internal pressure = 5.76/2.5 = 2.304 MPa

2) The formula for average shear flow is given as follows;

Where:

q = Average shear flow

T = Torque = 8 N·m

= Average area enclosed within tube

t = Thickness of tube = 6.35 mm = 0.00635 m

Side length of the square cross sectioned tube, s = 203 mm = 0.203 m

Average area enclosed within tube, = (s - t)² = (0.203 - 0.00635)² = 0.039 m²

Hence the average shear flow is most nearly 200 N/m.

answer: 500 wph.

explanation:

answer:

you cant but you can report the sender

and do you want to talk?

im xavier btw but i go by x

explanation: