Engineering, 12.06.2020 19:57 Lovescats9191
An "undisturbed" clay sample was taken from the site in problem 2 and an unconfined compression (UC) test was performed. Previous CU triaxial tests on that soil layer from a nearby site gave a Οβ=35 degrees. If the unconfined compressive strength was 475 kPa, determine the pore pressure at failure. Plot the results in Mohr-space.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
You know the right answer?
An "undisturbed" clay sample was taken from the site in problem 2 and an unconfined compression (UC)...
Questions
Mathematics, 07.04.2020 17:00
Mathematics, 07.04.2020 17:00
Mathematics, 07.04.2020 17:01
