At steady state, air at 200 kPa, 325 K, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet
and exit cross-sectional areas. The inlet cross-sectional area is
6 cm26cm
2. At the duct exit, the pressure of the air is 100 kPa and the velocity is 250 m/s. Neglecting potential energy
effects and modeling air as an ideal gas with constant cp=1.008 kJ/kg⋅Kc
p =1.008kJ/kg⋅K, determine
(a) the velocity of the air at the inlet, in m/s.
(b) the temperature of the air at the exit, in K.
(c) the exit cross-sectional area, in cm2
(a) the velocity of the air at the inlet, in m/s.
(b) the temperature of the air at the exit, in K.
(c) the exit cross-sectional area, in cm

the equation above shows how temperature f, measured in degrees fahrenheit, relates to a temperature c, measured in degrees celsius. based on the equation, which of the following must be true?

a temperature increase of 1 degree fahrenheit is equivalent to a temperature increase of

5

9

degree celsius.

a temperature increase of 1 degree celsius is equivalent to a temperature increase of 1.8 degrees fahrenheit.

a temperature increase of

5

9

degree fahrenheit is equivalent to a temperature increase of 1 degree celsius.

a) i only

b) ii only

c) iii only

d) i and ii only

answer:

yes

explanation:

One of the benefits of working with chlorinated polyvinyl chloride (CPVC) pipe is that it can be cut with a variety of different tools that don’t require any electricity or heat. However, different cutting methods are preferred over others, depending on the application.

When cutting CPVC pipe, it is important to make a square, flat cut. An uneven cut limits the bonding area and weakens the fitting.

To help you make the best possible cut, we’ve put together the following dos and don’ts when cutting CPVC pipe in different situations.