what's the proper way to discharge a capacitor? 1) connect a jumper wire across the terminals. 2) Apply 230 V to the terminals for a short period of time. 3) connect a bleed resistor across the terminals.

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.