Engineering, 24.06.2020 18:01 henrygrubb554
A horizontal turbine takes in steam with an enthalpy of h = 2.80 MJ/kg at 45 m/s. A steam-water mixture exits the turbine with an enthalpy of h = 1.55 MJ/kg at 20 m/s. If the heat loss to the surroundings from the turbine is 300 J/s, determine the power the fluid supplies to the turbine. The mass flow rate is 0.85 kg/s.
Answers: 3
![-\dot Q_{loss} - \dot W_{out} + \dot m \cdot \left[(h_{in}-h_{out}) + \frac{1}{2}\cdot (v_{in}^{2}-v_{out}^{2}) \right] = 0](/tpl/images/0693/2295/29442.png)
![\dot W_{out} = -\dot Q_{loss} + \dot m \cdot \left[(h_{in}-h_{out})+\frac{1}{2}\cdot (v_{in}^{2}-v_{out}^{2}) \right]](/tpl/images/0693/2295/8a23e.png)
, 
, 
, 
, 
and 
, then:![\dot W_{out} = -0.3\,kW + \left(0.85\,\frac{kg}{s} \right)\cdot \left\{\left(2800\,\frac{kJ}{kg}-1550\,\frac{kJ}{kg} \right)+\frac{1}{2}\cdot \left[\left(45\,\frac{m}{s} \right)^{2}-\left(20\,\frac{m}{s} \right)^{2}\right] \right\}](/tpl/images/0693/2295/68168.png)
Another question on Engineering
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
Engineering, 04.07.2019 19:20
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
Engineering, 04.07.2019 19:20
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
You know the right answer?
A horizontal turbine takes in steam with an enthalpy of h = 2.80 MJ/kg at 45 m/s. A steam-water mixt...
Questions
Mathematics, 26.01.2021 02:50
Mathematics, 26.01.2021 02:50
Arts, 26.01.2021 02:50
Mathematics, 26.01.2021 02:50
Mathematics, 26.01.2021 02:50
Geography, 26.01.2021 02:50
