Engineering, 24.06.2020 18:01 destineepreuss4472
To determine the viscosity of a liquid of specific gravity 0.95, you fill to a depth of 12 cm a large container that drains through a 30 cm long vertical tube attached to the bottom. The tube diameter is 2 mm, and the rate of draining is found to be 1.9 cm3 /s. What is the fluid viscosity (assume laminar flow)
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12ยฐ, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10รค1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 06.07.2019 03:20
Major ingredients of traditional ceramics (a) silica (b) clay (c) feldspar (d) all
Answers: 1
To determine the viscosity of a liquid of specific gravity 0.95, you fill to a depth of 12 cm a larg...
History, 06.05.2020 23:03
Mathematics, 06.05.2020 23:03
Biology, 06.05.2020 23:03
English, 06.05.2020 23:03
Mathematics, 06.05.2020 23:03
History, 06.05.2020 23:04
Biology, 06.05.2020 23:04
Biology, 06.05.2020 23:04
Arts, 06.05.2020 23:04