Engineering, 26.06.2020 15:01 wweghorst8275
Exploratory well “A” was drilled into a sand and encountered only water at a depth of 6732 ft with specific gravity 1.02 at a pressure of 3412.84 psi and temperature of 225 F. a second exploratory well, “B” was drilled updip, and found only gas at a depth of 6423 ft with a specific gravity of 0.765 at a temperature of 234 F and pressure of 3356.83 psi. Under these conditions, the Z-factor was 0.84. Using these information, estimate the depth to the G/W contact.
Answers: 2
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Exploratory well “A” was drilled into a sand and encountered only water at a depth of 6732 ft with s...
Mathematics, 23.04.2020 12:48
Mathematics, 23.04.2020 12:48
Mathematics, 23.04.2020 12:48
Mathematics, 23.04.2020 12:48
English, 23.04.2020 12:48
Physics, 23.04.2020 12:49
Mathematics, 23.04.2020 12:49
Computers and Technology, 23.04.2020 12:49
Mathematics, 23.04.2020 12:49
Mathematics, 23.04.2020 12:49
Mathematics, 23.04.2020 12:49