Q 2: A pin jointed frame (Figure 2) support a gravity load of 5k at C. An impulse cause the frame to vibrate freely in vertical direction with a velocity

of 0.2 ft/s. Calculate:

1. Static force corresponding to peak dynamic displacement.

2. Time required to complete 10 cycles during free vibration

Diameter of both members is 9/8 in Take E= 29,000 ksi

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Burgers vector is generally parallel to the dislocation line. a)-true b)-false