Engineering, 27.06.2020 19:01 armon15
An angular-contact, inner ring rotating, 02-series ball bearing is required for an application in which the life requirement is 37 kh at 540 rev/min. The design radial load is 725 lbf. The application factor is 1.4. The reliability goal is 0.93. For a C10 value of 63.7 kN, what is the reliability using the design factor, force, speed, and desired life from part a? The reliability is:.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
You know the right answer?
An angular-contact, inner ring rotating, 02-series ball bearing is required for an application in wh...
Questions
Biology, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
English, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
Biology, 18.03.2021 02:50
English, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
Mathematics, 18.03.2021 02:50
